Veneered furniture is wood furniture that has a flimsy layer of enlivening wood on its external surface. This facade can progress toward becoming scraped and scratched from mileage and may should be revamped. Veneered furniture can be revamped like other wood furniture, as long as the facade isn’t excessively thin, and you take care not to expel a lot of the facade when expelling the old completion.
Brush a layer of concoction stripper onto the veneered furniture. This will break down the old completion. Enable the stripper to represent the measure of time suggested by the maker.
Scratch the old completion off the veneered furniture with a putty blade. Work gradually to abstain from gouging the wood. Use steel fleece to scour the completion off in territories that are difficult to reach. Wipe the veneered furniture down with a sodden fabric to evacuate the stripper and bits of completion.
Sand the veneered furniture with 120-coarseness sandpaper only enough to harsh up the wood surface. Take care not to evacuate an excess of material as facade isn’t excessively thick. Wipe the wood with a tack fabric and delicately sand again with 220-coarseness sandpaper to smooth the wood surface. Wipe it clean with a tack fabric.
Brush an overwhelming layer of sanding sealer onto the veneered furniture and enable it to sit for the time prescribed by the maker. Wipe off overabundance with a material and enable it to dry.
Brush a layer of stain onto the veneered furniture. Enable the wood to ingest the stain for a few minutes, at that point wipe off overabundance recolor with a perfect fabric. Enable the layer of stain to totally dry.
Brush a few dainty layers of polyurethane to the veneered furniture and sand between every coat with 220-coarseness sandpaper. Brush in long, even strokes to maintain a strategic distance from air pockets in the completion. Softly sand simply after the polyurethane has dried and wipe clean subsequent to sanding.